It is a breathable paint with no added lime. It has superior strength and brush ability. It reflect heat and provides economical protection.
Available packaging :
20 Kg.
• Surface preparation
Remove all dirt, loose particle, laitance from the surface with the help of emery stone paper, wire brush or putty- blade. Prior to application of Decotouch wall putty, it is very necessary that the surface should be properly wetted with clean water to ensure good adhesion besides better coverage and easy work ability.
• Preparation & Mixing
Mix powder to water and not water to powder. Water to plaster ratio is (1 part water and 1.5 part of Jio wallputty to be maintained to provide good cohesive workable mix. Mix Jio wallputty to water by using electrical hand mixture rod to form uniform lump free paste, install the wooden strip / dhada or install the leveling strip in the area where the ready paste is to be applied. Apply the first coat approx. upto 8 mm to 10 mm of thickness, before the first coat sets rake and cross rake the surface. Fill in any hollow area, Level off and compact the surface, then apply the final finish coat. After complete drying for usually 72 hrs. (Depending on the thickness and humidity), the plain smooth leveled surface is ready for painting application.
• Applications
Freshly mixed wall putty should be applied on moist surface in a thin layer with the help of a putty blade or steel trowel. It is essential that the application is done from bottom to upwardly direction with the putty blade or steel trowel. Allow the surface to dry for at least 3-4 hour and apply the second coat as mentioned above. After dry of the second coat allow it to dry for 3-4 days before the application of paint. If required, treated surface can be sanded with 320 no. sand stone paper before application of paint. Maximum 2-3 coats can be applied but the thickness of each coat should not be more then 1 mm. Generally, 1 to 1.5mm coating thickness is advisable for putty application.
• Precautions & Safety
During extremely hot weather application finished coat shall be cured by sprinkling of water for 1-2 days for best results. Do not apply thick coat (more than 1-1.5mm) in one go.
• Packing
Available Pack - 40 kg
Made with special additives which protect walls against ultra violet rays and alkali . because of their make, they are flacking, peeling and fading resistance and also do not like algae and fungi develop on the surface. Additionally they also help cover minor wall defects like cracks and uneven surface due to thick texture and also work as protective coating in extreme temperatures of cold, rain and heat.
Interior Emulsion is possesses excellent wash ability and stain resistance to keeps the walls beautiful for long. It’s a low volatile organic compound product which ensures safe and healthy interiors. Its ant-bacterial property provides prevent product against bacteria.
Exterior Emulsion paints gives your wall an impression that invoke envy and lasts a lifetimes. Its paints boast of properties like water resistance, Dirt pickup, anti- algae, anti-fungi etc. These exterior emulsions will protect and preserve the freshness of your home and the impression it leaves.
Available packaging :
Distemper paints does not need any primer quoting can be directly applied on cement surface without any preprations. They are less expensive compared to other alternation. They stay long and upto three to five years.
Copyrights © 2020 Jio Paints All rights reserved. | Design by :- 